Cino HB2110 Bedienungsanleitung PDF herunterladen (Seite 30)

Configure Your FuzzyScanu

2-22

Operation Control

i Digial I/O Output Control, Pulse Interval Control i

PROGRAM M_DEFAULT

Family Code Selection P.C. Parameter Selection Option Code

Digital I/O Output Control

(for FBC-8000 Series Only)

Digital I/O output by user control 

Digital I/O output after good-read

Output initial state as low 

Output initial state as high

Pulse Interval Control

(for FBC-8000 Series Only)

None (00) 

01-FF (x10) msec.

Scan 2 digits from the option code chart in Appendix, then FuzzyScan will

terminate this selection automatically.

FIN

(2 digits)

The

Digital I/O Output Control

is currently available only for FuzzyScan FBC-8000 series fixed mount linear imager.

The

Digital I/O Output Control

provides the controls from or imposed on external devices upon preset reading conditions.

The

Pulse Interval Control

is the setting for pulse interval of digital I/O output. The actual value of the pulse interval will be 10 times of the setting value. For

example, if user sets the pulse interval as ‘05’, the actual interval should be 50msec.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 50 51

Keine Kommentare

Cino HB2110 Bedienungsanleitung Seite 30